การเลือกท่อพ่นทรายที่เหมาะสมที่สุดเป็นกุญแจสำคัญในการเพิ่มประสิทธิภาพการทำงานของอุปกรณ์พ่นทรายของคุณ. เพื่อผลลัพธ์ที่ดีที่สุด, ซึ่งควรจะใหญ่กว่าขนาดหัวฉีดของคุณอย่างน้อยสามเท่าเพื่อลดการสึกหรอและการสูญเสียแรงดัน.
ท่อพ่น Kingdaflex 2 ชั้น รองรับข้อต่อและหัวฉีดที่มีขนาดเหมาะสมสำหรับการใช้งาน. ตัวเคสถูกสร้างขึ้นให้ทนทานต่อสภาพอากาศ, โอโซน, and abrasion damage for long-term durability.
Length and Size
Selecting an optimal blast hose can significantly boost production and minimize issues with sandblast equipment. An optimal blast hose will be flexible and resistant to kinking while boasting a high pressure rating, and must possess an appropriate inner diameter that ensures air-driven abrasives travel efficiently from compressor to blast nozzle.
Typical sandblasting hoses are constructed of black antistatic rubber with polyester braid reinforcement for added abrasion resistance, complete with outer cover. Available in various lengths and sizes to meet different application needs, the hose can also feature either quick-connect or threaded inlet couplings depending on system needs.
Sandblast hoses are typically used to transport pressurized air from a blast pot to an abrasive nozzle for propelled blasting onto surfaces, then recycled back into the pot for recycling. As more pressure loss results from friction between particles bouncing back and forth along the length of a long blast hose, pressure loss becomes significantly increased and can even result in surface abrasion damage and decreased efficiency. It is essential to remember that long blast hoses experience greater pressure loss; longer lengths lead to greater pressure loss due to friction caused by friction between particles bouncing off between lengths which could increase pressure loss, leading to further pressure loss as abrasion damage as well as reduction efficiency in terms of reduced efficiency in terms of efficiency of operations.
To avoid this situation, it is crucial that the sandblast hose you purchase has enough length to reach the work area. A length no greater than 20 meters should suffice, as longer lengths will lead to unnecessary wear on its inner surface and reduce pressure loss and premature wear on hoses interconnected over equal distances. To do so efficiently.
Bends in hoses also contribute to pressure losses. A straighter hose would be preferable, as abrasive media tends to wear away the inner tube more quickly at points where it bends; and sharp bends can create turbulent flow which disrupts spray patterns by forcing media outside its intended path and away from nozzle.
Pressure Rating
A sandblasting hose must be designed to accommodate the pressure associated with its chosen abrasive material, such as aluminum oxide. A thick and high-pressure sandblasting hose is necessary while glass beads may require something more flexible and light weight.
Typically, the higher the abrasive pressure in a sandblast hose is, the longer-lasting and durable it will be. นอกจากนี้, selecting one with an appropriate pressure rating for your equipment is key for optimal sandblast hose use.
We carry an assortment of sandblast hoses with various pressure ratings to meet any application. Simply select your material of choice and the right hose size to find the ideal sandblasting hose for you!
Another key consideration in selecting the ideal type of sandblast hose is your blast nozzle size. For optimal performance, your bull hose should feature an internal diameter (ID) three times greater than that of your blast nozzle – this will prevent air pressure drop within the hose and help speed up blasting time.
Once you’ve selected a sandblast hose with the appropriate ID and pressure rating, it’s time to install it onto your equipment. To ensure a secure fit, be sure to clean out both ends and make them square before attaching couplings or nozzle holders – this will also maximize longevity while decreasing pressure loss.
Our 2 ply sandblast hose was created as a stiffer alternative to our 4-ply line without compromising durability or performance. It features a thick outer layer with high-tensile textile cord reinforcement for extra strength and abrasion resistance, as well as anti-static rubber that allows complete discharge of static electricity. Plus, weather, ozone and abrasion resistance make it an excellent choice for industrial jobs! Available in 10′, 25′ 50′ 100′ lengths as well as bulk 200′ lengths it comes complete with or without fittings – all American made!
Material
A blast hose is a key piece of equipment in any blast system, transporting compressed air and the abrasive materials directly to the working nozzle. Selecting high quality blast hose is essential to ensure optimal performance; any fault or wear on it may lead to pressure loss and shorten its lifespan significantly.
Blast hoses are constructed from various materials, including rubber and polyurethane. When selecting the material to use for your blast hose, take into consideration its durability, flexibility and ability to withstand different types of abrasives you are using as well as pressure rating requirements for your specific application.
Blue Dog Blasting, your go-to source for serious sandblasting equipment, offers an expansive selection of 2-ply blast hoses. These sturdy hoses accept various couplings and nozzles of various sizes as well as all forms of blast media, providing reliable performance every time. Though thicker and stronger than standard suppa hoses, 2-plys are still flexible enough to meet industrial settings’ tough requirements.
Clemco’s 4-ply hose offers serious sandblasting professionals another solution for long-run blasting jobs in industrial settings, boasting the strongest and most durable blast hose available today, complete with extra-thick walls to prevent scuffing and light traffic without collapsing. Perfect for long runs of hose in industrial settings; pair this blast hose with our twin hose holder and dead man control for increased versatility.
Our NL8005 sandblast hose is ideal for general blasting applications using steel shot or sand, including external abuse and internal abrasion, featuring a static-conductive tube to dissipate static electricity to prevent shocks and reduce operator fatigue. นอกจากนี้, this whip hose weighs 10% less and features soft walls which reduce operator fatigue. NL8006 whip hose is 10% lighter yet not as popular due to minor differences in thickness between this and NL8005. Both can be used with our durable NL4002 coupling which features built-in lock springs for vertical holding sections of blast hose.
Fittings
Sandblasting hose should be robust enough to withstand high blast pressures without suffering wear-and-tear, making premium material-made hoses often better choices than their cheap, recycled counterparts. While more costly, premium hoses tend to last longer and provide greater performance compared to their cheaper counterparts.
Selecting suitable hose fittings is also crucial to successful blasting equipment use, with couplings designed to connect hoses to various components such as the nozzle holder and pot. A hose equipped with both nozzle coupling and threaded pot end may help extend or alter your system depending on its use; one such hose could include one end with an added length option or swap out for different jobs.
When connecting a sandblasting hose to a nozzle, its coupling should be tightened so that it rests firmly against the flange of the nozzle holder without over-tightening – this could result in air leakage or premature wear on either party. When installing new couplings it is essential that all screws are securely tightened first before inserting a safety clip to protect against accidental disconnection or removal of the coupling from its host device.
Blue Dog Blasting’s Panblast abrasive blasting hoses offer premium, heavy-duty sandblast hoses designed with 4-ply construction for maximum flexibility and efficiency on any job site. Available with fittings such as nozzle holders and blast pots to increase blasting flexibility and efficiency, start by selecting the length and style that meets your requirements, then pair it with appropriate nozzles/holders/blast pots to achieve blasting success! In addition, don’t forget other accessories like twin hose or dead man controls to further boost productivity on site!